Watson 5 Light Semi Flush Polished Chrome Led

(447 customer reviews)

£246.69

In stock

SKU: LITWAT0550-LED Category:

Description

The WATSON 5lt Semi Flush has opal white glass shades and polished chrome frame.This fitting is a retro-fit LED fitting and comes complete with LED lamps.Matching products are available; type WATSON in the search box at the top of the screen to view the whole range.

Additional information

EAN

5060228763038
Brand

DAR Lighting
MPN

WAT0550-LED
Measurements

H37 x Ø48cm
Fixing Plate Dimensions

H3 x Ø10cm
Finish

Opal Glass, Polished Chrome
Material

Glass, Metal
Nett Weight (kg)

2 kg
Symbols

E
IP Rating

IP20
Range

Lighting

447 reviews for Watson 5 Light Semi Flush Polished Chrome Led

  1. Sue Trusler –

    Bien mais …

  2. Chef_M –

    Arrived really quickly. It works well and very happy with the item

  3. RGMax –

    Very beautiful We like it a lot, but it have different colours of cables..

  4. Mr D. S .Woods (verified owner) –

    Gear alternative to mains powered light. Motion sensor works very well with the light being bright.Attached externally to my my porch its bright and very effective.

  5. Mr Clive R Flack (verified owner) –

    Efficiente ed economico

  6. Mr. D. Lambert –

    This product came in a nice gift box, which was a little odd for an LED bathroom light but certainly not an issue Included in the pack are the light frame, the plastic diffusercover and mounting screws.Installation was fairly simple, just turn off power to the lighting circuit in your fusebox, remove the old fitting remembering to observe and record the wiring layout, and wire this in. It uses a standard screw terminal connector block so should be easy for most anyone to wire, and it does include a grounding strap to the lamp frame which is as it should be. After this you just need to make holes for the mounting screws, which is a bit annoying as there is a foam seal covering them which will need to be punctured in order to mark out your holes. I recommend putting the fitting flush against the ceiling and marking the first hole, then drilling and securing it before marking the other 2 to ensure everything lines up. After drilling and screwing in the other 2 screws and plugs, just put the cover on and twist.This light has a quite simple look when installed, which might come over as cheap to some, but I like it. My cover has some mould marks visible if you look directly at it, but frankly most people wont be doing that I also found the light quite dim, so I would recommend you think carefully about the 10w rating, as although the LEDs will likely last practically forever, you cannot change them out for something brighter without replacing the while fitting. Over time however I have gotten used to the light level and find it quite pleasing. I also like the neutral white temperature for a bathroom as it makes everything look very clean. Worth noting these LEDs give off a fair amount of UV which further enhances that effect.All in all, this is a decent product for the cost, and I would recommend it.

  7. C. Hunter (verified owner) –

    It works really well quiet efficent just a note I have said its easy to install I am a qualified electrician.

  8. DDK –

    looks lovely

  9. Peter the elder (verified owner) –

    Molto bello, facilmente applicabile e moderno Unico difetto che quando si spegne linterruttore le luci restano leggermente accese Per il resto ottimo

  10. Zymantas Sadzevicius –

    It has a lovely finish and so easy to fit with a lead long enough to adapt should needs be. Delivered in just one day.

Add a review

Related products