Description
The DELTA 1lt Table Lamp has a polished chrome frame, ivory woven cotton drum shade and is in line rocker switched.
Delta Floor Lamp Polished Chrome complete with Shade
£307.74
In stock
Additional information
| EAN | 5035128420343 |
|---|---|
| Brand | DAR Lighting |
| MPN | DEL4950 |
| Measurements | H156 x Ø38cm |
| Base Measurements | H10 x Ø28cm |
| Finish | Polished Chrome |
| Material | Metal |
| Cable Material | Black |
| Nett Weight (kg) | 4 kg |
| Symbols | 2W |
| Shade Material | Ivory Cotton |
| Lamp | 1 x 60w max ES GLS |
| Recommended Lamp | BUL-E27-LED-17 |
| Range | Lighting |
196 reviews for Delta Floor Lamp Polished Chrome complete with Shade
You must be logged in to post a review.
Amy Chapman (verified owner) –
This is a good light and makes a nice upwards glow. The only draw back is it get very hot when its on so, if you have it on a carpet, put something underneath it that is heat proof.
Electric Bike World –
eine sehr schne, schlichte Wandlampe. Sie Verbreitet schnes Licht. Fr meine Zwecke ist sie optimal geeignet. Wrde ich immer wieder weiterempfehlen.
Donna in PA –
This light fixture is stunning That goes without saying. Ordered 2 separately 2 different types arrived. This seller went above and beyond to rectify the situation, and was gracious throughout. Thank you very much. Would definitely buy from this seller again.
desiree –
Prezzo basso
kayo (verified owner) –
Bon produit je recommande vendeur fiable et lcoute
joey milenkovic –
Lampada di buona qualit, non semplicissimo il montaggio, bisogna ingegnarsi un po con il collegamento dei fili… Arrivata parecchio in ritardo
Karine Lefebvre (verified owner) –
Bonitas y fcil de colocar
J. A. Manock (verified owner) –
Bereits einige Lampen bestellt und sind sehr zufrieden.
Fishing Paul (verified owner) –
Very good light you can move anywhere on the roof or the ground I would buy it again.
Matthew Brierley –
Initially I could not understand previous review comments about problems with the back fixing plate. Now I do This back plate is fixed to the wall with two screws. No problem. The front plate which supports the lantern is attached to the back plate by two bolts which emerge through the backplate and provide anchors for the two black boltheads on the front to make the final fix. Yes do remember to push these bolts through BEFORE you screw the back plate to the wall. As the bolts are so short and need a flat flush wall to push them out to their full length you might consider putting a blob of blutack behind each of them to maximise their length. Mine still seemed so short as to just peek out of their holes and not present enough thread to attach the lantern frontplate. I had to remove the soft rubber seal to create just a little more screwthread for the final bolthead fixing. Designer please note LONGER bolts please. Good luck with your fixing.